Selected Audio Variable Pots, Attenuators & Switches
 |
OdO424H 23 position ladder Attenuator new
Designed for hi-end audio volume control.
A type ohmic law, impedance 500K
Use of;
- Holco precision metal film resistor, tol. 0.5%, 0.5W
- OdiO pure silver lead wire, 0.8mm dia.
- EM04-4130 ELMA Rotary Switch
4 pole, 24 position, gold flash pins
indexing angle 15¢X
Shorting, with solder eyelet
Size: 40mm x 37mm x 103mm |
 
|
SEIDEN Select Switch
MFG. of Japan
SD32NEG2-2-23 23 position, stereo
Shorting type, for volume control
Overall size: 37 x41 x60mm(D), 6mm shaft
SD32NEG4-4-23 23 position, stereo
Shorting type, for 4 channel/balance volume control
Overall size: 37 x41 x83mm(D), 6mm shaft
SD32NEG1-2-6 6 position, stereo
Non-shorting, for input select
Overall size: 34 x38 x49mm(D), 6mm shaft
Characters:
Load voltage/current: DC 200V/AC 0.2A
contact/isolation impedance: >5 m ohm(DC 6V/1A) / >1000M
ohm(DC500V)
Max. voltage: DC 500V 1 minute
Rotary torque: 0.5 ~ 1.5Kg
Duration: >50000 times(unload)
|
 |
SWSPPO 1P Push-Button Switch
13 x 30mm x 39mm(H), 11.7 mm fixing hole, 1 pole, push-on/release-off |
|
SW3PDT 3P
PUSH-ON Switch
Mfg. of USA
19 x 17mm x 42mm(L), 11.7 mm fixing hole, extra set of poles allows for true bypass with an LED for pure unaffected tone., 3P, Push On-On |
 |
VR-NB27 NOBLE Variable Resistor
Square, stereo, Made in Japan
27 x 26mm, 62 mm(L), A type(log)ohmic, with laudness
lead out
Impedance: 50K, 100K, 250K & 500K |
 |
VR-RS28 RS Variable pot
Round, MONO, suit for adjusting bias, Mfg. of UK
28 x 28mm, 43 mm(L),, Type A impedance
impedance: 250 ohm |
 |
VR-AB16 AB Variable pot
MONO, Round, Log ohmic (A type) ,16 x 16mm,
37 mm(L),
Impedance: 5K,25K,50K, 500K & 1M |
 |
VR-LIT34 LITTON Variable Pot
MONO,Round, ,6mm dia. shaft
34mm dia x 15mm, 51 mm(L), Log type ohmic,
gold plated pin,no step, Mfg. of UK
Impedance: 100KA |
|
French made Vishay Sfernice Ceramic Semi-fixed variable resistor
T93YA 0.5W, 85°C, tol. 10%,
50ppm
3/8" SQ,22 turns, fully sealed
Mil. spec and Pro
grade, 3/8" x 3/8" x 3/16", contacting point tol. <1%, lead to lead:
2.54mm, high tone for sound
Impedance:100, 200, 500, 1k, 2k, 5k, 10k, 20k & 100K |
 |
French Vishay Sfernice Ceramic Variable pot
20mm Round, fully sealed, MIL spec & Pro grade,
270°+/-10°,tol 5%, 6mm shaft dia.,20mm dia x
45mm,
for 10mm(recess 8mm)fixing hole, high tone
PE30 3W, 70°C, tol. 5%, log(A type ohmic law), Mono
Impedance:100K
|
 |
French Vishay Sfernice Ceramic Variable Pot
12.5mm SQ, mini size in fully sealed, meet with MIL
spec, long life
270°+/-10°,tol 5%, 6mm shaft,12.5mm x 36mm,
for 10mm(recess in 8mm)fixing hole, design for studio mixer in high tone
P11VY-M 1W, 70°C, tol. 5%, log(A Type ohmic law),
Mono
Impedance: 250K
P11VY-S 1W, 70°C, tol. 5%, log(A type ohmic law),
Stereo
Impedance(A type):100K
Impedance(S curve type):10K,20K,50K, 250K, 500K
|
 |
RS2 2 Step Selector
17mm x 24mm Sq,6mm shaft(recess in 5.5mm)
for 9.5mm fixing hole,DPST ON-ON, silver plated contact point, able to accept 10ms instant at current 64A |
 |
RS43 4 pole 3 Step Rotary Switch
4 pole each 3 steps, 26mm dia. x 70mm, 6mm shaft and 42mm in length, for 9.7mm fixing hole, silver plated contact point, Max carry current 5A, contact rating 250VAC/DC 150mA, Max panel thickness 3.5mm , UK mfg., solder tag, glass-filled nylon |
 |
RS6 6 Step Rotary Switch
26mm dia. x 70mm, 6mm shaft and 42mm in length,
for 9.7mm fixing hole, silver plated contact point, Max carry current 5A, contact rating 250VAC/DC 150mA, Max panel thickness 3.5mm , UK mfg., solder tag, glass-filled nylon |
|
VL-A40 L Pads Level Control
tweeter attenuator,
L-8Ω, 10W, 0-12 & infinite -dB,10 section adjust
Vialet, Japan Mfg.,
Size: 66 x 66mm(panel)x 3mm thickness
61mm cut out(install), 50mm(D)
|
 |
VL-A80 L Pads Level Control
tweeter attenuator,
L-8Ω, 30W, 0-12 & infinite -dB,10 section adjust
Vialet, Japan Mfg.,
Size: 66 x 66mm(panel)x 3mm thickness
61mm cut out(install), 58mm(D) |
 |
AT50H L Pads Level Control
tweeter attenuator,
wire wounded, L-8Ω, 50W, 300° ±5°, Mono
Taiwan Mfg. 6mm shaft, shaft length 32mm in M9 thread
Panel size: 54mm SQ(PVC panel)
Tuning knob size: 32mm dia. x 17.5mm(H)
Pad size: 50 x 55 x 29mm(body thickness), 60mm (H)
|
|
HBL22SP
HUBBELL Power Toggle Switch
Double pole/Double Throw On-On
20A 125V, nickel plated Spade terminal
size: 34 x 19 x 59mm(H),11.7mm fixing hole
USA. |
|
HBL12SP Hubbell Power
Toggle Switch
Single pole/Double Throw On-On
20A 125V, nickel plated Spade terminal
size: 29 x 14.5 x 54mm(H),11.7mm fixing hole
USA. |
 
|
HBL223SP
Hubbell Power Toggle Switch
Double pole/Double Throw, On-Off-On
20A 125V, 20SER, Brass plated spade terminal
size: 34 x 19.5 x 59mm(H),11.7mm fixing hole
USA. |
|
MSHITA
22SP Power Toggle Switch
Matsushita Double pole/Double Throw, On-On
15A 250V, Silver plated contact point
size: 33 x 19.5 x 56mm(H),11.9mm fixing hole
Japan
|
.
|
|
STO Toggle Switches
Double pole/Double Throw On-On
gold plated spade terminal
Japan
ST1313-6-ONN 6A 125V, ON-ON
size: 13 x 13 x 33mm(H),6mm fixing pole
ST1313-6-ONF 6A 125V, ON-OFF-ON
size: 13 x 13 x 33mm(H),6mm fixing pole
ST1011-3-ONN 3A 125V, ON-ON
size: 10 x 11 x 30mm(H),6mm fixing pole
FTN49 Toggle Switch
Double pole/Double Throw On-On
6A 125V, gold plated spade terminal,
size: 15 x 13 x 38mm(H),6mm fixing pole ,
Japan
F4TN49 Toggle Switch
Quad pole/Quad Throw On-On
6A AC 125V, gold plated spade terminal,
size: 23 x 15 x 38mm(H),6mm fixing pole,
, Japan
CK7201 Toggle Switch
Double pole/Double Throw On-On
5A 120VAC, silver plated spade terminal,
size: 8 x 11.5 x 33mm(H),6mm fixing pole,
C&K USA
FTN79 Toggle Switch
Double pole/Double Throw On-On
6A 125V, gold plated spade terminal,
size: 15 x 13 x 48.5mm(H),6mm fixing pole,
Japan |
.
|
EAGL-15A Eagle Rocker Switch
DPST On-Off, 15A 125V/10A 240VAC
Cut-out: 28mm x 19mm
Silver contacts, with polit light, USA Mfg.
SCH1922-10A Rocker Switch
DPST On-Off, 10A 125V~250VAC
Cut-out: 22mm x 19.4mm
Silver contacts, Schurter, Swiss
SCH1552-16A SlimLine Rocker Switch
DPST On-Off, 16A 125VAC
Cut-out: 12.2mm x 28.5mm
Silver/Brass contacts, Schurter, Swiss
SCHT120-20A LED Rocker Switch LED
DPST On-Off, 20A 125VAC
Cut-out: 22mm x 30mm
Silver contacts, Schurter, Swiss
SCHT-3IN1-10A
3 IN 1 Power AC inlet with Fuse holder and Rocker
Power AC inlet with Fuse box + Rocker Switch
DPST On-Off, 10A 125VAC
Cut-out: 67mm x 27.8mm
Brass/tinned contacts, Schurter, Swiss |
ALUXB-s30 Alum. Tuning Pole Extend Kit
Length:30 cm, 6
mm dia. (or 15cm length)
High quality anode plating over alum.
alloy.
3pcs set; Alum. rod,fixing eyelet, connecting jacket with 4
screws
ALUXB-s15 Alum. Tuning Pole Extend Kit
-- ditto --, but in 15cm length
|
ALUXB-d30 Alum. Tuning Pole Extend Kit
Length:30 cm, 6 mm dia. (or 15cm length)
High quality anode plating over alum. alloy.
3pcs
set; Alum. rod,fixing eyelet, connecting
Ceramic disk jacket with 4 screws(ALUX-ch)
ALUXB-d15 Alum. Tuning Pole Extend Kit
-- ditto --, but in 15cm length |
ALUX-ch22 Extension pole coupler
Length:19 cm, 22mm dia.
isolated by ceramic disc, holds 6mm
dia. of extension pole, chromed plated metal parts
ALUX-ch31 Extension pole coupler
--ditto-- but
Length:17 cm, 31mm dia.
|
 Above all are with 6mm dia. shaft
|