Tune-in a better sound by audiophile grade fuse device on your power sourcing
- The easier but simpler way, yet low cost  to effectly modify audio tone quality is upgrading sound quality with selected fuse -
 

Audiophile grade fuse

SR20 Synergistic Research audio fuse
Conductor; employs a custom alloy treated with 2,000,000 volts of electricity

- 5 x 20 mm 250V SLOW-BLOW:
100mA, 200mA, 250mA, 500mA, 630mA, 800mA, 1A, 1.6A, 2A, 2.5A, 3.15A, 4A, 5A, 6.3A, 8A, 10A, 12.5A & 16A

- 5 x 20 mm 250V FAST-BLOW:
50mA, 250mA, 500mA, 800mA, 1A, 1.6A, 2A, 2.5A, 3.15A, 4A, 5A, 6.3A, 7A, 8A, 10A, 12.5A & 16A

- 6.3 x 32 mm 500V SLOW-BLOW:
250mA, 500mA, 800mA, 1A, 1.6A, 2A, 2.5A, 3.15A, 4A, 5A, 6.3A, 8A, 10A, 12.5A, 15A, 16A & 20A(440V)

- 6.3 x 32 mm 500V FAST-BLOW:
250mA, 500mA, 1A, 1.6A, 2A, 2.5A, 3.15A, 4A, 5A, 6.3A, 7A, 8A, 10A, 12.5A, 15A, 16A, 20A(440V)
 

Furutech pottery tube, 5x20mm(S) 
Mfg. in Germany, Conductors of low induction copper alloy, Connectors cap uses copper with rhodium plating
Slow blow: 500MA, 1A, 2A, 3.15A, 4A, 5A, 6.3A, 8A, 10A, 15A

Furutech pottery tube, 6x32mm(L) 
Mfg. in Germany, Conductors of low induction copper alloy, Connectors cap uses copper with rhodium plating
Slow blow: 1A, 2A, 3.15A, 4A, 5A, 6.3A, 8A, 10A, 15A

Germay ELU glass tube, 5x20mm(S) 
  Slow blow: 500MA, 1A, 1.6A, 2A, 2.5A, 3A, 5A

Germany ELU glass tube,6x30mm(L)
  Fast blow: 1A, 1.5A, 3.15A
  Slow blow: 500mA, 800mA, 1A, 1.5A, 3A, 5A, 10A, 12A, 15A

USA BUSS MDL glass tube, twisted fuse type, 6.3x32mm BUSS MDL
  Slow blow: 0.8A, 1A, 2A, 3A, 4A, 5A, 6A, 8A

USA BUSS MDA Ferrule fuses, 6.4x31.8mm(L)BUSS MDA
  Slow blow: 2A, 3A, 5A, 8A, 10A, 12A, 15A, 20A

USA Little fuse ADA Ferrule fuses, 6.4x31.8mm(L)
 Slow blow: 1A, 4A

USA BUSS pottery tube, 5x20mm(S) 
Slow blow: 250mA, 500mA, 1A, 1.6A, 2.5A, 3.15A, 4A, 5A, 6.3A 8A, 10A

Swiss Schurter Pottery tube, 5x20mm(S) 
Slow blow: 2A, 12.5A, 16A, 20A
UK RS pottery tube, 6.3mm x 32mm(L)
   Fast blow: 1A, 2A, 3A, 4A, 5A, 6. 3A  

UK GEC Ferrule fuses in 6A, 10A

USA BUSS GLD 
with Albaloy-plated pin for positive,electrical signal circuit activation
   Fast blow: 1A, 2A, 3A, 5A, 6A, 12A  6.6x31.8mm(L)
USA BUSS GBA BUSS GBA
with a 'red' pin for high visibility
   Fast blow: 4A, 8A, 10A, 15A  6.6x31.8mm(L)
 


 
STFH-4813




Japanese Made SATO Fuseholders

STFH-4813  Chassis & uses as middle piece in build up row block,
48mm x 13mm, 10A/250V , 6.3 x 30mm fuse

STFH-4813-S Chassis, uses as side piece in build up row block,
48mm x 13mm, 10A/250V , 6.3 x 30mm fuse
* STFH-4813 + STFH-4813-S can be building up as block multi fuseholder

STFH-520  Chassis & uses as middle piece in build up row block,
10A/250, 5 x 20mm fuse

STFH-520-S  Chassis, uses as side piece in build up row block,
10A/250 , 5 x 20mm fuse
* Both STFH-520 + STFH-520-S able to build as multi fuseholder block

STFH-630-pcb  PCB type, oblong:10A/250 , for 6.3 x 30mm fuse


USA BUSS Fuse holder (discontinued)
BSFH-63-D Chassis/PCB type, oblong, 25A/300V,
BSFH-63-rh Buss Fuse Holder
Panel mount, round, 30A/250V, solder, rear hex nut, high profile, for 6.3 x 30mm fuse, 55mm length


BSFH-52-rl Buss Fuse holder
Panel mount, round, rear hex nut, 15A/250V, silver plated solder/ 3/16" quick-connect, low profile, for 5x20mm fuse, 44.5mm length

 

ACM-LN2 ACME CRYO Fuse Holder
Cryogenic treated, 15A/250V, for chassis use

Size; 14.6mm fixing cut-out, 50mm long,
Fuse type: 6.3 mm x 20mm, high profile, Mfg. in USA


Swiss Made Schurter Fuseholder
SHFH-63-rl Screwdriver Cap,Touch proof ,30A/250V CSA & RU approv. Size; 18.3mm fixing cut-out, 77mm long(45mm isolating protective sleeve),Fuse type use: 6.3mmx 30mm, low profile, rear hex nut
Sful Schurter fuse holder with protecter sleeve

SFFH-63-rlr Screw Cap,20A/500V RU
 Size; 15.7mm fixing cut-out, 61mm long, Use Fuse type: 6.3mm x 30mm, low profile, rotary shape cap 
Sfec Schurter fuse holder

Please contact for other spec and requirements not listed on this page
Last updated on 4/30/07